Carpet cleaning is not an easy task. It is normally best left to the professionals. If you still decide to do it yourself, this article will give you some guidance.
carpet, flooring, floors, home improvement, carpeting, rugs, cleaning, decorating, area rug
For the best Asphalt Repair contractors in Maryland company, call Glenview Paving And Masonry.
To find the best Asphalt Repair contractors in Maryland company, click here for Glenview Paving And Masonry.
Cleaning your own carpet can be a great way to save money. If not done properly however you can end up with quite a mess. This article will give you some tips on using a carpet cleaning rental on your home’s carpets.
The first thing you need to do is find a good carpet cleaning machine. You can find them at most home improvement and grocery stores. Look for one in good condition that isn’t too beat up or old. The older the machine, the weaker the vacuum and water pump probably is. Find a machine in good condition and also purchase the carpet cleaning shampoo that is sold with the machines. Do not even think about using dish soap or any other homemade concoction.
The first step, once you get the machine home is to thoroughly pre-vacuum your carpet. Do not overlook this step because soil is much easier to remove when it is dry. Go over the carpet in several different directions, taking your time.
The next step is where I will differ from the directions on the carpet cleaning machine. They usually want you to fill the machine with a shampoo solution. This means that you are rinsing with the solution and you will leave a lot of residue. Instead, mix the cleaning solution in a separate pump-up sprayer. You can find one gallon garden sprayers at any home improvement store. Now spray the carpet evenly with the cleaner. Do not over wet the carpet, spray the solution evenly and then let it dwell for 5 to 10 minutes. Dwell time will allow the solution to break down and absorb the soils.
Next, fill the carpet cleaning machine with plain warm water. After letting the solution dwell, you will make a pass over the carpeting to rinse the cleaning solution out. If your carpet is heavily soiled or you used a lot of cleaning solution, you may need to make two passes over the carpet. Your goal here is to remove as much of the cleaner as possible in order to leave the least amount of residue.
Finally it is time to dry your carpets. The quicker you get them dry, the less likely it is that spots will return and the less likely you are to get water marks. Turn your ceiling fans on and get out any portable fans you have and aim them at the carpet. If it is a nice dry day, open your windows or doors. The more airflow you get to your room the better.
Well, that’s it. That’s all there is to it. Just remember to take your time and do not take shortcuts. Follow these simple steps and you can easily clean your own carpet.