TR Swimming Pool Accessories Overview

526


Some people say that shopping for the perfect swimming pool can be as mind-boggling as shopping for a new car. The choices of make, model, and accessories are just as overwhelming, and advice from competing salespeople often make little sense.

The most important swimming pool accessory is the pool cover. You will use the plastic cover to seal the pool for the winter and to protect the pool from the harsh elements such as wind, ice and debris. A durable plastic cover will …


swimming pool,pool accessories,pool cover,pool pump

For the best Excavation Boston company, call Top Rank Roofing and Masonry.

To find the best Excavation Boston company, click here for Top Rank Roofing and Masonry.

Preventing Water Damage in the Kitchen

365


The following article will help you detect and repair the main problems in the kitchen and prevent water damage where it is likely to occur.

For the best masonry walkways new jersey company, call Right Choice Paving & Masonry.

To find the best masonry walkways new jersey company, click here for Right Choice Paving & Masonry.
The kitchen is often neglected even though it is often cleaned and warning signs of excess moisture and impending water damage are overlooked. Inspecting the following moisture sources will help in preventing damage where it is likely to happen. The following guide lines will help you keep your kitchen in good condition and to prevent damages caused by the refrigerator, the dishwasher and the dink and countertop.

Be thorough while performing these inspections and remember to do them every few months

Refrigerator

The area behind the refrigerator is hardly ever inspected because it is relatively hard to reach. Inspecting this area will reduce the chance for water problems. water behind the refrigerator is a sign. Do not ignore it, fix immediately or hire an appliance technician. If you detect mold growth, clean it immediately. Locate the moisture and fix it. If you have an icemaker, check the hose to make sure it is sealed and attached to the water supply.

Sink and Countertop

The sink and countertop are highly watered areas in the house. Check regularly under the sink and remove the trash can and other stored items to search for leaks. A drip in the trap under the sink means drain problems and must be repaired fast. Look around the sink, slow draining pipes indicate a blocked drain. A dripping faucet must me repaired promptly. Pay attention to the countertop. If tiles are cracked or grout is missing, fix it to prevent water from pervading. Stained walls and floors around pipes indicate an internal leak that must be fixed to prevent additional damage.

Dishwasher

If the dishwasher doesn’t empty after use, the main filter may be blocked and must be released promptly. When the sink overflows, it is usually due to back-ups. This problem usually occurs when the drain line is clogged. Clean the drain line regularly. Look under the base of the dishwasher for leaks. If you find any leaks, there could be an unsealed joint or a damaged hose. Check the connection and fix as needed. Check the dishwasher hose under the sink for signs of leakage and fix if necessary. Consider installing steel-braided hoses on appliances such as the dishwasher.

MV Pool Safety Even On Vacation

308


Not many people are fortunate to have a pool in their backyard, and when one goes on vacation it’s a great pleasure to swim in an outdoor pool. It can make your summer vacation more enjoyable.

Outdoor pools are great when the weather is nice and warm, and what better place then Florida. Though not every hotel offers pools, there are some who offer more then just a simple outdoor pool. If you stay at the ever increasing luxury villa, like the ones advertised on the Florida …


home, pool safety

For the best Waterproofing Long Island company, call ProStyle Paving And Masonry.

To find the best Waterproofing Long Island company, click here for ProStyle Paving And Masonry.

Are You Thinking About Buying Ornate Tin Ceiling Tiles?

775


You need to think about the metal used in the panelling and whether or not the pattern you like will suit your room. Are you going to paint and install the ceiling yourself? Author discusses these issues.


tin ceilings,tin ceiling,ceiling tin,tin ceiling tiles,pressed tin,pressed tin ceilings,pressed metal,decorative ceilings,ornate ceilings,renovate ceilings,ceiling restoration

For the best Foundations Slabs & Excavations New Jersey company, call Stonetouch Design Paving And Masonry.

To find the best Foundations Slabs & Excavations New Jersey company, click here for Stonetouch Design Paving And Masonry.
Use Aluminium Instead Of Tin

An aluminum alloy has now been created to especially suit these beautiful art metal ceilings. Aluminum is a corrosion resistant, durable product which doesn’t rust, unlike steel which is used by some manufactures of pressed tin. The panels are still widely known as pressed tin even though they are not made from tin.

Think About The Design In Your Ceiling Panels And whether They Will Suit The Measurements Of your Room

With a little forethought you can create a “tin” ceiling that exudes the “Wow Factor”. The “Wow Factor” is the reaction you will receive when your visitors look at your new ceiling for the first time. To get that factor you need to spend a little time thinking about how the ceiling panels will fit your particular room. If the repeat pattern you have chosen measures two feet by two feet, will you need to trim all the outside panels in order for them to fit the dimensions of your room? If this would be the case then you need to re-think your plans. You have two choices: choose a small all-over style which will look perfectly fine if trimmed to fit the room or you can use a border panel around the outside of your room and have the larger designs in the centre of the ceiling. Most of the larger designs require a border or filler strip around the edge, otherwise they don’t look so elegant when installed. Border or filler panels most usually have a small pattern on them which complements the larger main panels in the centre of the ceiling. If you require a border around your main panels then it will be worth consulting an expert to find out how wide the border should be. It is easy to upset the balance of your ceiling by having a border that is too wide or conversely too narrow. Ask your supplier for help on this topic.

Is Crown Cornice Needed?

There is now a delightful range of crown cornice moldings made from aluminum. These come in a variety of sizes to suit various ceiling heights. Crown cornices need to be mitred in the corners of the room and there are now various accessories to suit the individual cornices. These accessories are very handy as they hide the mitred cut edges which can sometimes be a little rough for those home handymen who have little experience in mitring. An alternative to metal crown cornices are timber moldings. Plaster cornices should not be used with metal ceilings.

Can You Install Your Tin Ceilings Yourself?

The easiest way to install pressed tin is to firstly fix building ply to the old ceiling or walls and then nail the tin to the ply. Timber battens can be used but building ply makes the job much easier. It is best to remove existing cornice before the ply is fixed to the ceiling.
Most reputable ceiling suppliers will offer detailed fitting instructions. If you lack experience in this area, you may prefer to employ someone with building experience. However, most metal ceilings are fitted by their owners. Tacking nails should be used initially until you are satisfied you have everything in its final position. Tacking nails are quite long and must only be partly nailed in so that they can be removed easily with pliers. When you are satisfied that everything is in the right spot then you can remove the tacking nails and finish the job off with small nails. Details of which nails to use should be in the manufacturers fitting instructions.

Painting your Metal Panels

Painting an ornate, aluminum ceiling in fine detail is easy because it is painted before it gets fixed to the ceiling. Most aluminum paneling is sold with etch primer already on it so it is immediately ready to paint. You can use one colour over the whole ceiling, you can add just a touch of colour on the moldings or you can can paint every detail in various shades of paint. The patterns in aluminum ceilings are more deeply pressed than other types of ceilings so they create lovely shadows themselves just from electric light or from natural daylight. Accordingly most people use one colour of paint over the whole ceiling. It is strongly recommended that pale shades of paint be used. Darker colours can be appealing in theory but in practice they can often give a heavy oppressive feel to a room. Oil based paints are recommended. If the nails are still visible you can dob each one with a little paint.

TR Superb Beds To Create A Truly Homey Bedroom

665


Beds are regarded as the most central article of furniture in a bedroom. They set the ambiance and climate in any bedroom. No matter how monstrous, spacious, and brightly colorful a bedroom is, it won’t have a snug and homey ambiance if the bed looks petite and untempting.


beds

For the best Excavation Boston company, call Top Rank Roofing and Masonry.

To find the best Excavation Boston company, click here for Top Rank Roofing and Masonry.
Beds are plainly the first furnishing one should have in a bed room. Beds are purchasable in different sizes. There are twin, full, king, and queen size beds. With the numerous sizes, one does not have to be controlled in determining the exact type of bed for their room. Beds are also made either of fine-grade wood or alloy.

Since it is the feature of the bedroom, beds must be given decent importance and decoration. You want to dress it up with the best and most dashing cloth, since it is the most salient thing that you will see when you move into the bedroom.

You should also consider the placement of the bed in your room. Situate the bed against the middle part of the wall, or opposite the entrance to the room. This makes the headboard the focal point of the room once one enters the room. If you cannot place the bed against the middle portion of the wall, then place it on the part of the wall which is sufficiently extended and spacious to contain the bed.

There are also limitations in placing the bed. You cannot just place it anywhere you wish. Specifically, you cannot place the bed under a window, especially if the window will be opened frequently. A bed under two windows is more feasible.

To complement the look of the bed, you can put some essential pieces of bedroom furniture such as dressers, cabinets, and night stands. Other bedrooms host chairs, loveseats, and benches where one can place extra linen and clothes, and of course, provide a nice place for guests to sit.

In choosing a bed, avoid shopping online as much as possible. You need to try the bed yourself in order to appreciate how it feels lying on it. One of the best ways to determine the right texture of the bed is to place a hand on your back and try to move it while lying. If the hand can move easily then it means the bed is too hard. If you are having a difficult time moving your hand, the bed is soft. If your hand can move with little resistance then the bed is good enough for your comfort.

In buying a bed, do not hesitate to spend. You need to pay more in order to have a more quality item. People tend to be tightfisted on buying bedroom furniture and accessories, believing that they can settle on less expensive materials. But in reality what they are getting is a poor quality bed. So if you have some space in your budget to afford another thousand of dollars or two, then do so! You will be benefiting from a more durable and stylish bed in the long run.

You also have to take into consideration the space that the bed will take up in the room. Beds should not eat half of the bedroom. The bed’s size, for one, should be big enough to take substantial space in the room. It should not be oversized though for the room since it could take space more than the room can offer, leaving you with little space to add other essential furniture like drawers, writing desks, and night stands.

Understanding Your Air Conditioner

657


So many people have them in their homes, but few people truly understand the basics behind their air conditioning units. They know enough to switch them on and set the temperature at the level they desire, but really know little about the parts that make the unit cool their house down. An air conditioner regulates the heat and cold in your house by controlling the humidity and temperature in each room, but do you know how it does this? Whether you are shopping for a new air c…

For the best Basements And Foundations contractors in Philadelphia PA company, call Go Direct Paving.

To find the best Basements And Foundations contractors in Philadelphia PA company, click here for Go Direct Paving.
So many people have them in their homes, but few people truly understand the basics behind their air conditioning units. They know enough to switch them on and set the temperature at the level they desire, but really know little about the parts that make the unit cool their house down. An air conditioner regulates the heat and cold in your house by controlling the humidity and temperature in each room, but do you know how it does this? Whether you are shopping for a new air conditioner or interested in learning about the one you have, the best place to start is with the general terms used to explain the functions of your unit.

BTU: A BTU or British Thermal Unit is the world wide measurement for energy. In layman’s terms it is the amount of heat that is needed to raise a pound of water by one degree of temperature. When you hear someone talk about BTUs in regards to air conditioning they are talking about the amount of heat a unit can remove from a standard sized room. The higher the BTU rating the bigger, more expensive, and heavier the air conditioner is. While many people think that bigger is better, when it comes to air conditioning that is not always the case. It is more important to correctly match the size of a room with the required amount of BTUs. Having too many or too few for the room’s size decreases efficiency and actually hinders the unit from doing its job.

Chassis: The chassis is simply the guts of your air conditioner. It is the frame and working parts exclude from the body of your unit. Smaller units often have a fixed chassis which is easiest to remove for winterizing. Larger units often have a slide out chassis that makes repair work a snap.

EER: The EER is simply calculated by dividing the BTUs into the number of watts. Air conditioners with higher EER numbers should be the most efficient. While a unit with a higher EER number will save you money in the long run, it will cost more to buy. If you don’t live in a really hot area, it might not be worth it to invest in a unit with an EER over 10.

Fan: The fan in an air conditioner works like every other fan you have ever seen. Its sole job is to move the air. When it comes to air conditioners an adjustable thermostat combined with an adjustable speed fan makes the unit very efficient. In an air conditioning unit, you want to look for louvers that not only adjust up and down, but right and left as well.

Filter: Air is surprisingly dirty and a good filter will make a big difference in the quality of the air you breathe. Clean air is also a must if you want to get the most efficient work from your air conditioner. Because clean air is so important to the operation and maintenance of your unit, it is important to change or clean your filters regularly. Because you will be dealing with the filter on a regular basis, it is a good idea to own an air conditioner that has an easily accessible filter.

Thermostat: A thermostat is simply a device used to regulate temperature. Thermostats are heat sensing and therefore able to adjust the output of your air conditioner based on the level of heat in a room. You can get thermostats that are manual or programmable, depending on your needs. If you can get an adjustable thermostat and a variable speed fan, your air conditioning unit will be very efficient.

Once you have a small understanding of how an air conditioning unit not only works, but works most efficiently and effectively, it is a lot easier to find a unit that fits your unique household needs and understand the most efficient ways to run it.

MV Pool Maintenance And Care

791


Some general tips on swimming pool cleaners and maintenance. It is very important that you take good care of your swimming pool, naturally you should make sure that the water are safe, and match the level of maintenance to the level of usage, since there is little chance you could predict your pool use it is recommended that you do this regularly. You will want to test the swimming pool water in the evening. Check the water before you add any kind of chemicals to the pool’s w…


pool cleaning, swimming pool cleaning, clean pool

For the best Waterproofing Long Island company, call ProStyle Paving And Masonry.

To find the best Waterproofing Long Island company, click here for ProStyle Paving And Masonry.

Preventing Water Damage in the Bathroom

370


The bathroom is extremely vulnerable for moist accumulation and potential water damage due to the frequent use of water in it. This article offers simple inspection techniques to help detecting water damage hazards.

For the best masonry walkways new jersey company, call Right Choice Paving & Masonry.

To find the best masonry walkways new jersey company, click here for Right Choice Paving & Masonry.
The frequent use of water in the bathroom makes it extremely vulnerable for moist accumulation and potential water damage. By inspecting it regularly, you can reduce water related damages.
The following set of inspections is easy to perform and should be done once in every three months in order to keep your bathroom in good shape and to prevent potential water damages caused by the bathtub, the shower, pipe joints and plumbing, sinks, cabinets, and the toilet
Do not neglect performing these inspections and be thorough while performing them. Keep in mind that these simple inspections can save you a lot of money by providing early indications for water damage

Bathtub and Shower

The shower and bathtub require special attention and maintenance. Check the tiles and replace if cracked. Make sure that there is no missing grout between the tiles. Inspect and replace cracked caulking at joints where the walls meet the floor or the bathtub. Clogged drains and pipes problems will prevent the bathtub from drying and may indicate serious problems beneath the bathtub. Consult with a professional immediately to prevent structural damage. Pay attention to discolorations or soft areas around the bathtub walls as they may indicate an internal leak.

Plumbing

Signs for water damage are hard to detect since most pipes are installed inside the walls.
Pay special attention to flooring and walls moisture and stains as they may indicate an invisible plumbing problem. Check moisture levels in adjoining rooms as well.

Sinks and Cabinets

Sinks and cabinets are exposed to moisture and humidity daily and are often overlooked. Inspect regularly under the sink and on the countertop above it. Repair any drip in the trap as it may suggest drain problems. Look around the sink, slow draining pipes may indicate a blocked drain. Replace sink seals if they are cracked or loose.

The Toilet

The toilet is a vulnerable water junction. Check the water lines and search for leaks around the toilet seat, in the hose, and under the water tank. If you detect any signs of moisture on the floor around the toilet, check for leaks in the toilet rim and tank seals.
Be aware that hanging toilet bowl deodorants increases the chances for clogs.

Are You Safe Without A Ladder Lock

239


Did you know that more than fifty construction workers or home improvement persons fall down from ladders annually. 50 percent of


ladder lock safety

For the best Foundations Slabs & Excavations New Jersey company, call Stonetouch Design Paving And Masonry.

To find the best Foundations Slabs & Excavations New Jersey company, click here for Stonetouch Design Paving And Masonry.
Did you know that more than fifty construction workers of home improvement persons fall down from ladders annually. 50 percent of these fatalities are people that were doing a project from the ladder. The main reason the deaths happened was because they were stepping down from the ladder. They did not follow ladder lock safety. The ladder either slide from its base or tilted sideways.

The most important factor in ladder lock safety is making sure the lock is utilized and in its proper placement. Some basic guidelines are as follows:

Ladders that are 48 feet or more in length must have five feet of overlap.

Ladders that are 32 to 48 feet tall should have an overlap of at least four feet.

Ladders that are less than 32 feet long should have an overlap of three feet or more.

Extension ladders need to have the top portion locked and overlap the two sections.

Locks must be greased and oiled on a consistent basis.

A ladder lock you should consider using is the Hook Um Ladder Lock. It is one of the newest and most advanced. The Hook Um Dano ensures safety, plus it also stops theft. You can use it to fit your van, truck, or ladder racks. There are no loose chains, wires, ropes, or straps. If you are traveling, your ladder is locked in, and protected from thieves and accidents. You receive a full warranty from the manufacturer for one year.

TR Sump Pump Installation

283


What a Sump Pump does:
A sump pump is used to dewater basements and crawl spaces. There are six different types of sump pumps, each with advantages and disadvantages. Determine what you require from a sump pump and then decide on a specific type.


sump pump, sump pump cover, backup sump pump

For the best Excavation Boston company, call Top Rank Roofing and Masonry.

To find the best Excavation Boston company, click here for Top Rank Roofing and Masonry.
What a Sump Pump does:

A sump pump is used to dewater basements and crawl spaces. There are six different types of sump pumps, each with advantages and disadvantages. Determine what you require from a sump pump and then decide on a specific type.

Sump Pump Installation Directions:

Before performing a sump pump installation, ALWAYS disconnect the pump from the power source before handling.

Clear any debris from pit and place the pump inside. A solid bottom is required to prevent dirt from clogging the pump.

Make sure the pump is centered so that it will not come into contact with the sides of the pit which might cause operational problems.

Pipe the sump pump discharge into the house drainage system, a dry well or a storm drain.

Install a swing type check valve on the discharge piping to prevent backflow of water into the sump pump.

Drill a relief hole in the discharge pipe to ensure that the pump will not “air lock”, which would allow the pump to run but not pump water.

Secure the pump cord to the discharge pipe.

Connect the pump to an electrical outlet. Run water into the sump to test it.

Do not attempt to operate the pump without water.

Fill sump pump with water to the normal turn on level

After the sump pump installation is completed, you may wish to install a sump pump cover. This will help eliminate odors and keep debris from falling on top of the pump.

Sump Pump Installation – Should you do it yourself