Home Theatre Speaker Placement: Improving Your Home Theater Experience

706


Sometimes improving the sound quality of your home theater is as simple as adjusting your speaker placement.
This article outlines the best placement for various speaker elements to maximize the sound quality of your theater.


Home theater speaker, Home theater speakers, home audio speaker, home audio speakers, home audio system, speaker placement

For the best Roofing And Siding Boston company, call Bayside Masonry And Restorations.

To find the best Roofing And Siding Boston company, click here for Bayside Masonry And Restorations.
Whether investing a large amount of your savings or a small part of your budget on your home theater, your speaker placement will play a big role in the sound quality and sonic performance in your home theater room.

The instructions that come with your speakers will give you recommendation for where to place them within a room but below are a few things to consider as you begin setting up your new home theater speakers.

CENTER CHANNEL SPEAKER
This speaker’s main purpose is to anchor sounds on-screen, like dialogue.

Tips for placement of the center channel speaker:
1. Center it directly above or below your television.
2. If you place it above the television, the front edge of the speaker should line up precisely with the front edge of the television. This will cut down on any kind of sound “bouncing around” inside the television cabinet.
3. The tweeter of this particular speaker should be at the same height as the tweeters of the front speakers. If you can accomplish this to within 24 inches, that will allow for the best sound quality.
4. The front speakers and this particular speaker should be spaced the same distance away from your planned listening position.

FRONT SPEAKERS: BOTH LEFT AND RIGHT
These speakers have two distinct purposes. They reproduce stereo music sound while also handling a movie’s soundtrack.

Tips for placement of the front speakers:
1. Find your optimal listening position. Now space the two front speakers at points in the room that are equal is distance to that position, with one to the left and one to the right. The front right, front left and center channel speakers should all be approximately the same distance from where you are sitting, with the tweeters of each directed at your ears. Don’t just eyeball this and get an approximate distance, as even an inch variation in the distance of the speakers can make a noticeable difference in your home audio system’s sound quality.
2. These speakers’ tweeters should be even to your ear level when seated in the optimal listening position. Smaller home theater speakers can be mounted on the wall or placed on a speaker stand. Floor standing speakers normally have this covered in their design.

SURROUND SPEAKERS
The purpose of the surround speakers is to provide low and high level sound from other parts of the room, creating a movie theater feel in your home theater. The surround speaker placement will depend on the size of your home theater, the shape of the room, and the space needed for the actual speakers. Be creative and experiment with the placement of these particular speakers throughout the room.

Tips for placement of the surround speakers:
1. Place the primary pair to the right and to the left of your optimal listening position. This can be done in line with your position or just behind it. When placement to the side is impossible, or when you have a surround system with more than two surround speakers, you may wish to place the speakers behind the listening position, with the sound being directed toward the front of the room.
2. These speakers should be placed at approximately ear level when you are in a standing position.
3. Experiment with the aiming of these speakers when mounted on the walls. Sometimes good results can be achieved when you point them up at the ceiling or back at the rear corners of the room.

SUBWOOFER
A home theater subwoofer provides your home audio system with all the low bass frequencies needed for a movie theater, surround sound experience. However, it is one of the least difficult to position. In most cases, you can position your home theater subwoofer anywhere in your home theater and still get good results.

There is no one “perfect” placement for any given home theater speaker. No two rooms’ acoustics will be the same, all speakers will have various sonic characteristics, and no two ears will hear any given sound identically. This doesn’t mean you will never achieve the best sound quality from your home audio system. All it means is take the advice given and modify it when you actually install your home theater speakers to accommodate your specific needs.

~Ben Anton, 2007

Spa Covers: Why You Need One

525


As expensive as it is to buy and install a home spa, many spa owners look for ways to cut costs. One of the most obvious places they look is with the spa equipment itself, and for good reason. While many spa extras can be trimmed away to save a little bit of money, one of the places that consumers should not skimp is on the spa cover.


spa, spas, day spas, spa resorts, spa covers, spa equipment, spa supply, home spas, health spas

For the best blacktop new jersey company, call All Design Paving & Masonry.

To find the best blacktop new jersey company, click here for All Design Paving & Masonry.
As expensive as it is to buy and install a home spa, many spa owners look for ways to cut costs. One of the most obvious places they look is with the spa equipment itself, and for good reason. By opting out of premium spa accessories like a wireless remote control system, consumers can save thousands of dollars on their spa purchase. While many spa extras can be trimmed away to save a little bit of money, one of the places that consumers should not skimp is on the spa cover.

Even though spa covers can cost anywhere from $400 to $1,000 or more, choosing to not buy one can cost you all of that and much more. The reason why is because spa covers save energy, chemicals and lives.

No matter whether your spa is outdoors or indoors, the majority of the energy it takes to run your spa goes toward heating your water to just the right temperature. As with any water that is left to sit, the water in your spa will cool down to room temperature or the outdoor temperature when the spa is not in use. This means that you will have to use even more energy to heat it up again before using it a second time, and a third, and so on. The colder you let your water get, the more energy that it will take to heat it up.

Spa covers help conserve energy by keeping your water temperature consistent. You see, the spa cover is made with a layer of foam insulation that works the same way that a thermos does. It keeps the cold air out and the warm water, well warm. This means that it will only take you a little time and a little bit of energy to heat your spa to the desired temperature before use.

Another way that spa covers help save you money is by conserving chemicals. Did you know that a gallon of chlorine will evaporate in a few hours on a hot day? With this in mind, just imagine how much chlorine you will waste if you leave your spa uncovered for the entire summer. A spa cover also helps keep rain, leaves, bugs and other undesirables out of your spa. This not only saves you money on chemicals but saves your back as well because you will not spend near as much time cleaning your spa as you would if it was left out with no barrier to protect it from the elements.

Safety is another concern around any type of water. In fact, the leading cause of death for children less than five years of age is drowning. Sure, you can be diligent about not letting any children near your spa, but snapping on a cover takes away the risk and your worry. You may even be held liable if a neighbor’s child falls into your spa.

So, let the remote control go; let the built-in snack bar go; but make sure that you purchase a spa cover and use it whenever the spa is not in use. You may save more than just a few dollars.

MV Making Artwork Arrangements

269


Hanging artwork in groupings can create an exciting look for any room. Learn simple techniques to show your art at its best.


art, artwork, arranging, arrangements, hanging, grouping

For the best Waterproofing Long Island company, call ProStyle Paving And Masonry.

To find the best Waterproofing Long Island company, click here for ProStyle Paving And Masonry.

Mattress Selection – A Practical Approach

655


Choosing a new mattress is a very important task as it can either give you or deny you of many nights of quality rest and sleep for the useful life of the mattress itself.


mattress, mattress store, mattress expert, firm mattress, contour pillow, Seahorse Mattress, Queen Size, King Size, sleep

For the best masonry walkways new jersey company, call Right Choice Paving & Masonry.

To find the best masonry walkways new jersey company, click here for Right Choice Paving & Masonry.
I have been using the same old bed ever since I was a teenager and it had been comfortable until 3 years ago, when my legs had finally cross the finishing line at the border of the mattress. It bothered me to feel my legs hanging in mid air when I sleep. Enough is enough. A new mattress is a must.

I for one am a tall person of 183cm. I also weigh 86kg and that makes any soft mattress sink after a few months. So these led me to the quest of getting my new mattress from my dad’s mattress store. Being a mattress store heir doesn’t make me a mattress expert. But as an eager learner, I sure did absorb a lot during my mattress shopping time and I can honestly share this with you; buying a mattress requires logic and commonsense which is seldom present when most people are shopping.

One can easily be blinded by promotions and discounts and the outlook of the product rather than the features and benefits which suits you as an individual. Therefore, I have decided to pen down the few tips and approach for the benefit of every would be mattress buyer:

i) What’s your height?

If you are a tall person, then you’re in trouble when shopping for a mattress. Though its a blessing to be tall, because its rare, then its also a curse when it comes to shopping for mattress because long mattresses only exists in custom made orders. This will cost you extra money but its well worth it compared to having your feet dangling in the air while you sleep.

ii) Do you suffer from backaches and pains?

If you have backache and pains, then the best solution is a firm mattress and a contour pillow. Firm mattresses provide excellent lumbar support and a contour pillow will give your neck and head a good support too. A great brand of mattress I’d like to tell you is the Seahorse Mattress. This is a popular mattress brand name in Hong Kong and Singapore. I personally had my brand new Seahorse Mattress imported because to me, its a necessity. Resting on a Seahorse Mattress will make you feel a total new level of relaxation on your lower back, which you have seldom had the chance to experience. Yes, it is as good as it gets.

iii) Do you roll about in your sleep?

Believe me when I say, this can be very dangerous. If you roll about in your sleep, obviously it is better to get a bigger bed. A Queen Size or King Size bed can give you more room to roll. Falling down from beds have led to many injuries which can be harmful. One may knock their heads against the floor, suffer internal injury and not remember it, or even knock your head against a sharp corner, depending on the placement of your room furniture. Try to position your bed against a wall as that reduces up to 50% of any chance of you falling off your bed. You may have a tendency to roll left or right more often so I can’t possibly calculate so accurately for you.

iv) Finally, do you share your bed with a spouse?

If you do, please discuss with them because you want your spouse to have a good night’s rest just as much as you do. How can you possibly sleep well if your spouse isn’t? Yet another commonsense issue which many need to pay attention.

There are many more criteria and issues involved when selecting your mattress however, that’s another story for another article. With the common sense approach listed above, you will gain better sleep in terms of quality. Your family and you deserve to sleep well. Don’t buy mattresses just because they look nice. Treat it like a car purchase and you’ll never regret it for the useful life of that mattress.

You Don’t Always Need A Contractor For DIY Home Improvements

645


The cost of getting repairs or home improvement done by licensed contractors are known to be high, but often necessary, mainly because most people do not have the skills or equipment necessary to make a repair in their homes or complete improvements themselves.


diy,home improvement

For the best patios new jersey company, call Milton Masonry & Restorations.

To find the best patios new jersey company, click here for Milton Masonry & Restorations.
The cost of getting repairs or home improvement done by licensed contractors are known to be high, but often necessary, mainly because most people do not have the skills or equipment necessary to make a repair in their homes or complete improvements themselves.

You don’t always need to hire an expensive contractor to do a job, though. For example, often when a power failure occurs, it is nothing more than a blown fuse. Most home fuse boxes are located in basements or garages of homes. When you experience an outage, make sure you check and distinguish between blown fuses or melting wires. If you hire an electrician to simply repair a blown fuse, it will cost you a lot of money (including labor charges) to replace the fuse, when you can do it yourself for a few dollars.

You can check a fuse by placing a working fuse in the opening where you think that the fuse is blown. Remember to remove the fuse and return it to its original place instead of leaving the fuse in the slot, so as to avoid the danger of fire.

Note:
Modern homes are equipped with breakers and when the breaker fails it will automatically shutoff the electricity. Changing a breaker is similar to changing fuses; they require little effort to replace and you usually instructions when you buy a new breaker, giving you directions on how to change it out. Follow the steps closely when doing an installation.

Light switches are another minor household issue that can be easily repaired by you. Most switches last for several years before a problem occurs, but there are times when a repair is necessary. Make sure to follow the instructions when repairing the switches, and shut off the power supply to the switch, since working with electricity can be very dangerous.

It is smart to cut off the circuit breakers when installing a new part. After you remove the switch plate cover, you will see screws that hold the circuit box in place. These screws will have to be removed as well. Before continuing the process, you should use a ‘neon tester’ to test the circuits for charge. This will help prevent shock.

When you see the wires inside the outlet box, be careful to follow the installation instructions carefully. Once inside the box you will see two wires, one black and the other wire red. You can dust off the wires if necessary. Once you have found the wires you can begin repairing the problem. You must connect the black wire with the “brass terminal” in the circuit. The curving ends must lock clockwise before you can screw the screws into in place. Follow the same procedure for the other wire. It is imperative to read the directions carefully when dealing with electricity in your home.

Home improvement is a creative journey and an investment, whether you are improving the home’s value, or repairing the home for your family’s safety. Doing some of the work yourself will save you a great deal of money in the long run, rather than paying high labor charges to a professional contractor.

Additionally, repairing or improving your home inevitably increases its value. Many people feel intimidated at the idea of repairing or remodeling their home themselves.

By clearing the hindrances out of your way and following instructions carefully, you will save a great deal of time and money on DIY home improvement, as well as have renewed confidence in your abilities. Contractors want to justify their high costs to you by making you believe that many of the repairs or improvements are huge jobs that require only a professional’s touch. If you are interested in DIY home improvement, do lots of research by getting manuals and books from the library, and you will know exactly what the work entails.

Copper Roof Vent

511


Roof vents are becoming very popular today as more and more people find that these kind of vents help cool the house in an effective and nice way. The use of roof vents uses a lot of logic because heat rises up so catching this heat as it goes up and gets into the vent to travel out of the house.

When thinking of a good material to use as a cooling unit like this, one that has to get rid of the heat and must also suffer the effects of heat passing through it, you must thin…


vents, copper vents, roof vent, roof vents

For the best Asphalt Repair contractors in Maryland company, call Glenview Paving And Masonry.

To find the best Asphalt Repair contractors in Maryland company, click here for Glenview Paving And Masonry.
Roof vents are becoming very popular today as more and more people find that these kind of vents help cool the house in an effective and nice way. The use of roof vents uses a lot of logic because heat rises up so catching this heat as it goes up and gets into the vent to travel out of the house.

When thinking of a good material to use as a cooling unit like this, one that has to get rid of the heat and must also suffer the effects of heat passing through it, you must think of some material that is strong and reliable and this is in most cases copper. The copper is a very good decision because of its unique features, it is used in many cases when it needs to suffer heat and still function and not melt, it is also relatively easy to maintain and clean and not so expensive to repair and replace.

The people looking and using vents usually means that they have such a heat build up in their home they desperately need some relief, and some assurance that they are getting the finest product that will keep their house cool for a significant time. The copper roof vet will do just that, just like some consider the copper to be the best cookware material due to its resistance to heat the roof vent is another great use for copper materials which demonstrate once again that copper is the way to go when looking for some guaranteed results.

The copper roof vent can come in a few different sizes and shapes, one of them is the roof vents sleeve, like a cylinder providing a way for the heat to exit the house and not allowing animals into the house this is one of the preferred vents, or the vent cap which is like a hat, preventing water from entering the vent and allowing the heat out.

If you are on the market for a vent or a roof vent you should research this market because there are many specialists and special shops that might have advanced models or even unique designs to go with your house look, as with all markets there is a difference of prices and quality so you better make sure that you are getting something for your needs. In general you should fit your needs and be as effective as possible, as well as try and have some design to it as it will be visible, the one feature you must look for is durability, this is something that will be exposed to the outside and will have to prevent water and animals from entering the house, make sure that you are covered by a warranty, support and help in cases something goes wrong with the vent.

Today’s vents are advanced and better then ever before, make sure you got the right roof vent. If used correctly and maintained you can have a simple and powerful way of getting a cooler house and significantly reduce the heat.

The Origin Of Grandfather Clocks

462


Remember those big, wooden clocks with long pendulums and which gives out eerie sounds? Antique clocks can evoke feelings of nostalgia for times gone by. Hearing the clock going ding-dong could either bring a person back to the past or to a time in the future.

Clocks, no matter what kind they are, have always been an important aspect of man’s life. The invention of the clock has made life easier for humans, who used to tell time by the way the sun’s rays were positioned i…


clocks, grandfather clocks, parts, chimes

For the best Basements And Foundations contractors in Philadelphia PA company, call Go Direct Paving.

To find the best Basements And Foundations contractors in Philadelphia PA company, click here for Go Direct Paving.
Remember those big, wooden clocks with long pendulums and which gives out eerie sounds? Antique clocks can evoke feelings of nostalgia for times gone by. Hearing the clock going ding-dong could either bring a person back to the past or to a time in the future.

Clocks, no matter what kind they are, have always been an important aspect of man’s life. The invention of the clock has made life easier for humans, who used to tell time by the way the sun’s rays were positioned in the sky. Our ancestors could tell it is noon when the sun is set at a certain height or level in the sky. While this system worked, it made the telling of time impossible during night time or at times when it is raining.

Mechanical clocks which sounded a bell at every hour were invented in the 1300s. However, these clocks were so primitive they did not have minute hands or faces which could easily tell the time the way the clocks do nowadays. The discovery of the coiled spring in the 1400s made possible for the existence of smaller clocks and even watches. It was in the 1600s when the pendulum clock was invented by Christiaan Huygens. However, the pendulum clock was still considered inaccurate.

Such was the British Parliament’s yearning for a clock that could accurately tell the time, that a cash reward awaited anyone who could create a clock that could be used even for navigation. Finally, the accurate clock was invented and humans were once again able to navigate and work, knowing that their clocks were telling them the right time.

One of the clocks that have become famous is the grandfather clock. This clock is known for being a work of art in itself, enclosed in a tower case and has a long pendulum. Remember that in the olden days, the longer the pendulum of the clock was, the more accurate the time. Grandfather clocks usually measured high at a minimum of six feet tall, and the tower made of hardwood and glass.

The Grandfather clock actually referred to the floor clock kept in the George Hotel in England, owned by the two brothers. The death of one of the brothers resulted to time malfunction of the floor clock. When the clock started to fail when the second brother died, the clock was never repaired. This was the same clock which inspired the song “My Grandfather’s Clock”, composed by Henry Clay Work in 1875 and written after he stayed in the George Hotel and learned of the story of the two brothers.

Most Grandfather clocks are striking clocks. Striking clocks, like the Big Ben clock in London, are clocks that make a gong sound at every hour.

TR Rope: The Best Tool

357


A rope is a very useful tool, which can be found in every house, factory or industry. The rope has an unlimited number of uses, ranging from household to industrial. The rope can be defined as length of fibers, twisted or braided together to improve strength, to pull and connect. There are various materials that make up a rope. These materials include manila, hemp, hair, nylon, and steel. The most important feature of any rope is its compressive strength and flexibility.

R…


rope,wire rope,jump rope,nylon rope,ropes

For the best Excavation Boston company, call Top Rank Roofing and Masonry.

To find the best Excavation Boston company, click here for Top Rank Roofing and Masonry.

A Look at Cuckoo Clock Movement

338


The inside mechanics of cuckoo clocks maintain virtually the same design since the day they were first created in the Black Forest of Germany. While the parts are now sometimes made out of metal and plastic instead of the all wood versions that started it all, the weights and counterbalance mechanisms that help them perform accurately and to imitate the sound of the cuckoo bird have not changed much in almost 300 years. A mechanical movement run by weights that hang from the bottom of the clock drives the action of most cuckoo clocks. Most clocks have three weights, while some larger more complex versions require three weights hanging from the front of the cabinet. They are commonly in the shape of pinecones and must be pulled periodically, depending on the model. Spring-driven cuckoo clocks never really caught on and subsequently are quite rare.


Cuckoo Clocks, Black Forest Cuckoo Clocks, Cuckoo Clock Parts, Cuckoo Clock Repair

For the best Foundations Slabs & Excavations New Jersey company, call Stonetouch Design Paving And Masonry.

To find the best Foundations Slabs & Excavations New Jersey company, click here for Stonetouch Design Paving And Masonry.
The inside mechanics of cuckoo clocks maintain virtually the same design since the day they were first created in the Black Forest of Germany. While the parts are now sometimes made out of metal and plastic instead of the all wood versions that started it all, the weights and counterbalance mechanisms that help them perform accurately and to imitate the sound of the cuckoo bird have not changed much in almost 300 years. A mechanical movement run by weights that hang from the bottom of the clock drives the action of most cuckoo clocks. Most clocks have three weights, while some larger more complex versions require three weights hanging from the front of the cabinet. They are commonly in the shape of pinecones and must be pulled periodically, depending on the model. Spring-driven cuckoo clocks never really caught on and subsequently are quite rare.

Black Forest cuckoo clocks run on a set of wheels that lock gears and provide the power necessary to swing the pendulum back and forth. Every time the pendulum makes a complete swing back and forth, one tooth of the wheel is released from the escape wheel. Each time a tooth escapes, the time train moves forward, resulting in a very small movement of the minute hand. When you first bring your new cuckoo clock home you will need to test its timing against a battery operated clock of some kind. If you measure the difference in time between your cuckoo clock and “real” time, you can then adjust your cuckoo clock to perform more accurately by adjusting the weights that hang beneath the housing. It’s always an educated guess rather than an exact science, and old fashioned cuckoo clocks are never one hundred percent accurate, but patience and readjustments made every twenty four hours over a few days will get your clock functioning as close to perfection as possible. The standard rule of thumb is to try to get your clock to miss only a few minutes per week and live with it.

Spa Covers

368


Spa Covers are an economical solution to saving power and retaining the heat in the water.

By using a spa cover the heat that would normally dissipate from the water when left uncovered, is captured under the cover and due to this, there is a lot less power required to reheat the pool.

There is a big range of spa covers and also a big variance in their prices. The higher quality spa covers can cost quite a lot more than their cheaper alternatives, however they might wor…


spa covers, hot tub covers, spa pools, hot tubs

For the best blacktop new jersey company, call All Design Paving & Masonry.

To find the best blacktop new jersey company, click here for All Design Paving & Masonry.
Spa Covers are an economical solution to saving power and retaining the heat in the water.

By using a spa cover the heat that would normally dissipate from the water when left uncovered, is captured under the cover and due to this, there is a lot less power required to reheat the pool.

There is a big range of spa covers and also a big variance in their prices. The higher quality spa covers can cost quite a lot more than their cheaper alternatives, however they might work out more economical over time as they are better at retaining heat and saving energy.

As well as the obvious power savings that can be gained by having a spa cover there are the additional benefits of cleanliness and safety.

By having a spa cover the water in your spa will remain a lot cleaner when not in use and this will save money on chemicals. Spa covers also add safety to your spa with most covers able to hold the weight of a small child should they ever venture onto the cover.

Many authorities are now insisting that spas are either fenced or covered to help with child safety and a spa cover is often a cheaper and more appealing alternative than fencing off the area surrounding the spa.

There are many accessories that can be purchased for the premium model spa covers such as remote control systems that will cover the spa at a touch of a button. These accessories can add considerably to the cost of the covers but make the use of them very simple and convenient.

Most spa covers are made from vinyl with added support from a steel or aluminum frame. The premium covers have additional heat saving insulation materials to help retain more heat in the water and reduce power costs.

When you are buying a spa cover it is wise to check the consumer comparison sites on the Internet to see what is available in the price range that you can afford. By shopping around you might be able to get a higher-grade spa cover for the same price as the budget models, particularly if you are buying direct from the manufacturer.